ホーム: ホーム >> アプリケーション >>ビル・オートメーションおよびセキュリティ

Intrusion Detection with SNMP and IP Video in Factory

業種 ビル・オートメーションおよびセキュリティ
関連製品 EDS-510A シリーズ
ioMirror E3210
概要 Wars and oils are the hottest issues in the Middle East. And the oil storage tanks are usually the target of attack during wartime. Typically, oil storage tanks and refining equipment are the most important parts of the oil refinery industry. To protect hose facilities from being damaged is a top priority of those oil vendors.
お問い合わせ

プロジェクト紹介


Project Intro

Wars and oils are the hottest issues in the Middle East. And the oil storage tanks are usually the target of attack during wartime. Typically, oil storage tanks and refining equipment are the most important parts of the oil refinery industry. To protect hose facilities from being damaged is a top priority of those oil vendors. One of our customers in Europe planned to combine video and alarm signals in one fiber network. In addition to video surveillance, digital I/O devices in the field were used for remote monitoring and alarm. However, the IP surveillance system is a bandwidth killer. To assure those alarm messages can be delivered with precise time stamps is the key. The client used SNMP to monitor their network devices and wanted to integrate this new intrusion detection system with their remote monitoring system. SNMP, Fiber network and low bandwidth consumption are the prerequisites for the new system.
 

System Requirements

• SNMP support for each device
• I/O device/status controlled by SNMP
• Device status reporting by SNMP traps
• Large bandwidth using fiber ring architecture
• Industrial-grade video surveillance to withstand bad weather conditions

 

Moxa Solution

To implement a reliable network backbone that can support 200 IP video feeds, the customer used the EDS-510A managed Ethernet switch to build a redundant Gigabit Ethernet network. Although the EDS-510A's two digital input channels are insufficient for extra monitoring devices, the ioLogik E2210 Active Ethernet I/O server was able to provide the necessary digital I/O channels. The built-in SNMP support and multiple I/O channels of ioLogik E2210 are available for control and monitoring by SNMP, no additional management software is required. In addition, status changes of each I/O channel can be actively reported by SNMP traps, so there is no need for data polling.
 

 

 Why Moxa?

• SNMP support for I/O channel monitoring and control
• Easy integration of I/O server with existing SNMP management software
• Solutions for redundant Gigabit Ethernet infrastructure

 

Product

ioLogik E2210
• Intuitive Click&Go™ control logic, no programming needed
• Supports TCP/UDP/SNMP traps/Email event reports
• I/O control over Modbus/TCP and SNMP protocol
• Built-in RTC for precise time stamps
• 12 DIs, 8 DOs

 

EDS-510A
• 2 Gigabit ports for redundant ring and 1 Gigabit Ethernet port for uplink solution
• Turbo Ring (Recovery time < 20 ms) and RSTP/STP redundancy
• Supports QoS, IGMP snooping/GMRP, VLAN, LACP, RMON


© 2018 Moxa Inc. All rights reserved.