ホーム: ホーム >> アプリケーション >>電力およびユーティリティ

Embedded Computer Controls PLC and Switch in Wind Turbine

業種 電力およびユーティリティ
関連製品 IA240
IA260
概要 Wind farm networks employ SCADA systems to collect data from wind turbines. A PLC (Programmable Logic Controller) is used for data acquisition and the data is sent via an Ethernet switch. A notable wind turbine manufacturer from Spain was looking for embedded computers to control and exchange data from the PLC to the Ethernet switch to improve data communications and management.
お問い合わせ

プロジェクト紹介


Background

Wind farm networks employ SCADA systems to collect data from wind turbines. A PLC (Programmable Logic Controller) is used for data acquisition and the data is sent via an Ethernet switch. A notable wind turbine manufacturer from Spain was looking for embedded computers to control and exchange data from the PLC to the Ethernet switch to improve data communications and management. 

 

Application Requirements

l   An on/off switch system to control the data from the PLC (lock, bypass, or pass to the Ethernet switch)

l   Dual LAN ports for configuring and transmitting data from PLCs to Ethernet switches

l   Built-in DI/DO to control the on/off switch system, detection system and alarm system

l   Front-end data computing and storage

 

Solution Figure

 

 

System Solution

Initially, the wind turbine in this case study was without embedded computers so the data passed from the PLC to the Ethernet switch without filtering or managing any front-end data.

 

By using Moxa's IA260 embedded computers, our client can decide whether to lock, pass, or bypass the data from the PLC to the Ethernet switch, as well as compute, store, and filter front-end data to improve data communications and management. 

 

Moxa's IA260 features 8+8 DI/DOs to control the on/off switch as well as intrusion detection and alarm light systems. In addition, some DI/DOs can be reserved for future use. The dual LAN ports (one fixed IP and one configurable port) allow data to be transmitted from the PLC to the Ethernet switch. The switch will then deliver data to the SCADA system. In addition, a CompactFlash slot and extra serial interfaces (4 serial ports) are available for future storage expansion and use. 

 

Why Moxa?

l   Moxa's embedded computers are recognized for being reliable and trusted wind power controllers for PLCs and switches

l   All-in-one embedded system: only one Moxa embedded computer is needed thanks to multiple interfaces, dual LANs, and DI/DOs

l   Industrial and stable embedded system allows consistent network operation 

 

 Rcore Ready-to-Run Embedded Software Platform

The high reliability and stability of Moxa's embedded computers give users an extra advantage over the competition. To boost our customers' competitiveness for a faster time-to-market, Moxa is offering application developers a valuable embedded software platform. Called Rcore, this platform brings you the following hard-to-beat benefits:

l    Easy to use application libraries

l    Proven and bug-free sample code

l    Consulting-level advice for application development

l     Fast concept validation and development cycle


© 2018 Moxa Inc. All rights reserved.