ホーム: ホーム >> アプリケーション >>電力およびユーティリティ

Automatic Meter Reading for Centralized Power Monitoring

業種 電力およびユーティリティ
関連製品 NPort 5130
概要 One of our Middle Eastern clients was constructing a skyscraper but had insufficient space to install serial communication wiring to connect the building's numerous power meters to the control room. Learn about how Moxa took advantage of the building's existing Ethernet network to provide automatic meter reading for the skyscraper's power meters.
お問い合わせ

プロジェクト紹介


Project Background

Automatic meter reading (AMR) technology automatically collects data from devices such as electricity, water, and gas meters, and transfers that data to a central database for billing or analysis.

 

One of our Middle Eastern clients was constructing a skyscraper with a high density of devices and communication mediums on each floor. In addition, the control room needed to gather and monitor a great deal of information including security alarm signals, air conditioner controls, signal controls, power meters, etc. However, there was insufficient space to install serial communication wiring to connect the power meters to the control room. Since an Ethernet network was already installed, the client wanted a solution that satisfied the following requirements:

 

1. Data transmission from each group of power meters to the control room

2. Minimal additional wiring space

3. Minimal additional IP addresses

Moxa's Solution

The power meters were connected to one of the NPort® 5130's serial ports, which exchanges signals with the control room via Ethernet. By utilizing the existing Ethernet network, serial signals from the power meter can be transferred without additional wiring effort. An additional advantage of the NPort® 5130 is multi-drop support for up to 31 serial devices. Thus, the control room can receive power meter data from all NPort® 5130 units in the skyscraper over the Ethernet network and satisfy the following requirements.

 

1. Uses the existing Ethernet infrastructure to transmit power meter data

2. Scalable number of NPort® 5130 devices to serve all RS-485 serial interface power meters 

 

 

 

Benefits

1. The NPort® 5130 offers an effective serial-to-Ethernet solution for data transmission.

2. No additional wiring effort or cost.

Product Implemented

NPort® 5130
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile operation modes
• Easy-to-use Windows utility for configuring multiple device servers
• Built-in 15 KV ESD protection for all serial signals
• SNMP MIB-II for network management
• Configure by Telnet or web browser
• Adjustable termination resistor for RS-485 ports 


© 2018 Moxa Inc. All rights reserved.